Calculator hub

Epithalon calculators

Reconstitution, dose, mg ↔ units, and vial duration — all four Epithalon calculators in one place, pre-filled with a 10 mg / 2 mL example.

Epithalon reference numbers

Derived from the example vial used to pre-fill the calculators below.

Vial
10 mg
mixed with 2 mL BAC water
Concentration
5 mg/mL
5000 mcg/mL
Example dose
5 mg
≈ 100 units on U-100
Doses per vial
2
at 5 mg
Weeks per vial
0.3
at 7× / week

Epithalon is a short four-amino-acid peptide people use in cycles, usually for sleep quality and as a longevity-adjacent experiment. The interest comes from research suggesting it can lengthen telomeres — the protective caps on the ends of chromosomes — and influence the pineal gland's melatonin rhythm. The original Russian trials reported telomere-length increases and improved sleep markers, but independent replication is limited. This page covers reconstitution math and how people log a typical 10–20 day cycle.

How the four Epithalon calculators connect

This tool turns the three numbers on your Epithalon vial into the only number that matters at injection time: how many units to draw on a U-100 insulin syringe. The math is one formula — concentration in mg per mL equals the milligrams of peptide in the vial divided by the milliliters of bacteriostatic water you add — and every other answer falls out of that.

In the worked example below, a 10 mg vial of Epithalon reconstituted with 2 mL of BAC water produces a concentration of 5 mg/mL. To draw the example dose of 5 mg from that vial you pull 1.00 mL — about 100 units on a standard insulin syringe. Change any input and the rest updates instantly so you can pre-plan a vial before you ever touch a needle.

Vial size, diluent volume, and dose are the three inputs that genuinely change the answer. Doses-per-vial is a derived output — it's the vial mg divided by the dose mg, rounded down. The most common edge case is a tiny dose: at very high concentration, a 0.1 mL draw is only a few units on the syringe, which is hard to read accurately. If your unit count drops below five, consider reconstituting the next vial with more BAC water so each dose covers a larger volume.

What the Epithalon calculators cover

This hub gathers the four Epithalon calculators in one place — reconstitution, dose, mg ↔ units, and vial duration — pre-filled with a 10 mg / 2 mL example so the math is concrete the moment the page loads. Epithalon sits in the Other category, and the numbers each tool surfaces are tuned to how people actually log this peptide: a daily shot at the 5 mg example dose. A synthetic tetrapeptide studied for its pineal-derived links to telomerase activity and circadian cycles.

At the example concentration of 5 mg/mL, a 5 mg Epithalon dose draws roughly 100 units on a U-100 insulin syringe — the Dose calculator on the hub shows that working in real time, and the mg ↔ units converter flips it back the other way for people who think in milligrams. The Reconstitution calculator answers the day-one question (how much bacteriostatic water to add and what concentration that gives), and the Vial Duration calculator answers the planning question (how many weeks one vial covers).

For this 10 mg Epithalon vial, the example numbers imply about 2 doses per vial and roughly 0.3 weeks of coverage at 7 doses per week — that's the math the Vial Duration tool exposes, and it's the number most people use to decide when to reorder. Every calculator on the hub uses these same five inputs (vial mg, diluent mL, dose, doses-per-week, syringe type), so changing your real numbers in one tool gives consistent answers across the others.

How people log Epithalon

The administration schedules documented in Epithalon research are notably different from those of many other peptides, underscoring its unique biological context. A commonly observed protocol involves short-term, consecutive-day administration cycles lasting from 10 to 20 days. Following this intensive period, an extended break of several weeks to six months is typically observed before the cycle might be repeated. This cyclical cadence, sometimes performed one to four times per year, is a defining characteristic of the research initiated by the St. Petersburg Institute and is a critical variable to document for long-term analysis.

Due to the peptide's studied influence on circadian rhythms and melatonin pathways, administration timing is a carefully considered parameter in many research designs. Dosing is often scheduled for a consistent time each day, frequently in the late afternoon or evening, to align with the body's natural dip in cortisol and rise in melatonin. When considering a typical example dose of 5 mg, the mathematics of reconstitution require careful planning, as this can result in a large injection volume that fills or exceeds the capacity of certain types of syringes, influencing the choice of diluent volume from the outset.

The cyclical nature of the published Epithalon protocols also has implications for how the calendar around the cycle is documented, not just the cycle itself. A 10-to-20-day administration window followed by months of no administration produces a sparse log that can be hard to interpret in retrospect unless the off-period is annotated with the same care as the on-period. Researchers who handle the off-period as part of the dataset typically record sleep quality, perceived recovery, and any subjective changes during the break, which provides a baseline against which the next cycle's observations can be compared. Without that baseline, a year-over-year comparison of cycles collapses into a list of dose dates with no surrounding context, and the long inter-cycle gaps that define this peptide's protocol structure become a weakness of the record rather than a feature of it.

Common Epithalon mistakes to avoid

  • Failing to recognize that 'Epitalon' is simply an alternative spelling for 'Epithalon', leading to confusion when recording data or comparing sources.
  • Neglecting to log the specific start and end dates of each administration cycle, which makes it impossible to accurately review the long-term protocol cadence.
  • Continuing administration daily for months without interruption, a practice that deviates significantly from the cyclical 10-20 day protocols detailed in research literature.
  • Reconstituting a 10 mg vial with 2 mL of diluent and not anticipating that a 5 mg dose requires drawing the full 100-unit capacity of a 1 mL syringe.
  • Scheduling administration at random, inconsistent times of day, which foils any attempt to study its specific influence on the body's circadian rhythms.

Frequently asked questions about Epithalon

What is the difference between the spellings 'Epithalon' and 'Epitalon'?
There is no difference in the substance itself; both names refer to the exact same synthetic tetrapeptide, Ala-Glu-Asp-Gly. The molecule's name is derived from epithalamin, a peptide extract from the pineal-epithalamus region. Both spellings are used in scientific literature and on commercial vials, so it is helpful to recognize them as perfect synonyms.
Why is research on this peptide so focused on telomerase?
A substantial body of research, much of it from Russian scientific institutes, investigates the relationship between Epithalon and telomerase. Telomerase is the enzyme responsible for maintaining telomeres, the protective caps at the ends of chromosomes that shorten with cell division. Studies document observations of Epithalon's effects on telomerase activity and telomere length, making it a subject of interest in cellular aging research.
How do I calculate units for a 5 mg dose from a 10 mg vial?
The calculation depends on your diluent volume. If you reconstitute a 10 mg vial with 2 mL of bacteriostatic water, the solution's concentration becomes 5 mg per mL. Therefore, to draw a 5 mg dose, you would need precisely 1.0 mL, which is equal to 100 units on a standard U-100 insulin syringe.
Why are the research protocols structured with such long breaks?
The widely published protocols for Epithalon, often associated with its discoverer V. Khavinson, involve short courses of 10-20 consecutive days. These are followed by long off-periods of four to six months. This pulsed cadence is a distinct feature of how this peptide is studied, contrasting with the daily, continuous administration seen with other substances.
Does Epithalon have a direct relationship to melatonin?
Epithalon is not melatonin, nor is it a direct precursor. Its studied relationship is with the pineal gland, which is the body's primary source of melatonin. Research investigates Epithalon's potential to help regulate the pineal gland's own function, thereby normalizing the natural, rhythmic production of melatonin rather than introducing it from an external source.
What is the significance of the pineal gland in Epithalon's origin?
Epithalon is the synthetic, four-amino-acid component of epithalamin, a complex extract taken from the pineal glands of cattle. This origin is central to its identity and research focus. The pineal gland governs the body's circadian rhythms, and study of Epithalon is often aimed at observing its influence on these fundamental biological cycles.

Related on Peptide Pilot

Track Epithalon doses in the app

Peptide Pilot stores your vial once and derives every subsequent dose, draw, and refill reminder from those numbers automatically.

Download on the App StoreiPhone · Free · No credit card