Calculator hub
Sermorelin calculators
Reconstitution, dose, mg ↔ units, and vial duration — all four Sermorelin calculators in one place, pre-filled with a 5 mg / 2 mL example.
- Open calculator
Reconstitution
Sermorelin reconstitution calculator
Mix a 5 mg vial with bacteriostatic water and read units, mL, and doses-per-vial in one tap.
- Open calculator
Dose
Sermorelin dose calculator
Convert any Sermorelin dose in mg or mcg into syringe units based on your vial concentration.
- Open calculator
Conversion
Sermorelin mg ↔ units converter
Two-way bridge between dose mass and U-100 syringe units for Sermorelin.
- Open calculator
Inventory
Sermorelin vial duration
See how many weeks one vial of Sermorelin covers at your current dose and weekly cadence.
Sermorelin is a daily evening injection people use to bump up their own natural growth hormone production, usually for sleep quality, recovery, and skin and body-composition changes. It's a shortened version of the body's GHRH signal, so it nudges the pituitary instead of replacing GH from outside. Clinical studies in adults show modest but measurable IGF-1 increases over months of nightly use. This page covers reconstitution math and nightly logging cadence.
How the four Sermorelin calculators connect
This tool turns the three numbers on your Sermorelin vial into the only number that matters at injection time: how many units to draw on a U-100 insulin syringe. The math is one formula — concentration in mg per mL equals the milligrams of peptide in the vial divided by the milliliters of bacteriostatic water you add — and every other answer falls out of that.
In the worked example below, a 5 mg vial of Sermorelin reconstituted with 2 mL of BAC water produces a concentration of 2.5 mg/mL. To draw the example dose of 0.2 mg from that vial you pull 0.08 mL — about 8 units on a standard insulin syringe. Change any input and the rest updates instantly so you can pre-plan a vial before you ever touch a needle.
Vial size, diluent volume, and dose are the three inputs that genuinely change the answer. Doses-per-vial is a derived output — it's the vial mg divided by the dose mg, rounded down. The most common edge case is a tiny dose: at very high concentration, a 0.1 mL draw is only a few units on the syringe, which is hard to read accurately. If your unit count drops below five, consider reconstituting the next vial with more BAC water so each dose covers a larger volume.
Use this calculator any time you open a fresh vial, switch BAC water volume, or step a titration dose up. Each new vial gets its own concentration and its own unit count — the previous vial's numbers do not carry over, and that is the single most common reconstitution mistake.
What the Sermorelin calculators cover
Sermorelin is a synthetic peptide representing the first 29 amino acids of human growth hormone-releasing hormone (GHRH), making it the shortest functional GHRH analog in common use. Originally synthesized in the 1970s, it has one of the longest research histories of any peptide in its class. This 29-amino-acid structure preserves the full intrinsic activity of native GHRH, allowing it to bind effectively to its target receptor in the pituitary gland. Its identity is fundamentally tied to being the minimal active fragment of the endogenous hormone.
The extensive history of Sermorelin includes its formulation as an FDA-approved diagnostic agent and therapeutic for pediatric growth hormone deficiency under the brand name Geref. Although this product was later discontinued for commercial reasons unrelated to its safety profile, the data from its clinical use provides a substantial body of knowledge. The peptide's characteristically short biological half-life, estimated at around 10 to 20 minutes, is a defining trait that dictates the common single daily dosing schedule observed in research protocols.
To fully document the history of sermorelin, it is important to understand the context of its former commercial branding. For many years, sermorelin acetate was manufactured by Serono under the brand name Geref Diagnostic. The intended application for this product was as a diagnostic agent to assess the pituitary gland's capacity to secrete growth hormone. However, in November of 2008, the manufacturer officially discontinued the product, a decision that has since been the source of some confusion for independent researchers.
How Sermorelin is studied
Sermorelin functions by binding to and stimulating the growth hormone-releasing hormone receptor (GHRHR) located on somatotroph cells in the anterior pituitary. This action directly mimics the physiological role of endogenous GHRH. Activation of the GHRHR initiates a signaling cascade that results in the synthesis and subsequent release of the pituitary's own stored growth hormone (GH). Because Sermorelin is cleared from the body rapidly, the resulting GH release is a discrete pulse, a characteristic often described as 'pulse-preserving'. This mechanism is fundamentally different from direct GH administration, which creates sustained, non-pulsatile levels of the hormone.
The functional mechanism of sermorelin can also be viewed through the lens of circadian biology. As a GHRH analog, it stimulates pituitary somatotrophs to release growth hormone, but the timing of this stimulation in research protocols is often deliberate. The body’s most significant endogenous GH pulse occurs during the initial phase of slow-wave sleep early in the nightly sleep cycle. Research protocols often explore administration just before this period to study how the peptide interacts with the body's peak natural pituitary activity. This allows observers to document how sermorelin's mechanism integrates with a pre-existing physiological rhythm.
How people log Sermorelin
Research protocols for Sermorelin are built around its very short half-life and the body's natural circadian rhythm of GH secretion. Administration is frequently scheduled as a single subcutaneous injection per day, timed shortly before bedtime. This approach is intended to have the peptide's activity coincide with the largest natural GH pulse of the day, which occurs during the first few hours of slow-wave sleep. The goal is to augment this existing nocturnal pulse rather than to create an independent secretory event at another time.
A U-100 insulin syringe is the instrument typically used for subcutaneous administration, with the cadence in example protocols often set at seven times per week for consistency. The choice of a pre-sleep injection time is a deliberate strategy to align the peptide's stimulus with the body's endogenous endocrine schedule. The entire protocol structure is designed around Sermorelin's identity as a short-acting GHRH mimetic, leveraging its rapid onset and clearance to work in concert with natural pituitary function.
Protocols detailed in published literature frequently document a specific administration cadence tied to the sleep cycle. A common approach studied involves a single daily administration scheduled immediately before bedtime. This timing is methodically chosen to coincide with the body's primary endogenous GH pulse, which occurs during the first few hours of deep sleep. For personal data tracking purposes, documenting the precise time of administration relative to sleep onset is a critical variable to record. For instance, an individual following a daily cadence might calculate a 200 mcg illustrative dose from a 5 mg vial reconstituted with 2 mL, which involves drawing 0.08 mL or 8 units on a U-100 syringe.
Common Sermorelin mistakes to avoid
- Mistaking its short half-life for a lack of activity and consequently attempting to use multi-day dosing intervals.
- Dosing in the morning, which works against the body's natural GH circadian rhythm and the peptide's designed function.
- Assuming it operates identically to longer-acting GHRH analogs and failing to maintain a rigid nightly administration schedule.
- Using a very low diluent volume, such as 0.5 mL, which makes the accurate measurement of a typical 200 mcg dose exceedingly difficult on a U-100 syringe.
- Neglecting to document the precise time of evening administration, which makes it impossible to audit adherence to the pre-sleep protocol later.
- Misattributing the 2008 discontinuation of the commercial product Geref Diagnostic to safety problems, when public records show it was for commercial reasons related to sales volume.
- Failing to document the precise administration time relative to sleep, which makes it difficult to analyze any observations in the context of the body's natural circadian GH release.
- Assuming that any administration time of day is equivalent, thereby ignoring the body of research that specifically studies nighttime administration to coincide with slow-wave sleep.
Frequently asked questions about Sermorelin
Why is Sermorelin composed of only the first 29 amino acids of GHRH?
What is meant by a 'pulse-preserving' stimulus in the context of Sermorelin?
Why is Sermorelin's dosing schedule typically set for right before bed?
With a 5 mg vial and 2 mL of diluent, how many units is a 200 mcg dose?
Is the very short half-life of Sermorelin considered a disadvantage?
Given its age, has research on Sermorelin been superseded by newer analogs?
Why is sermorelin administration often studied with a bedtime dosing schedule?
Was the sermorelin-based product Geref taken off the market for safety reasons?
What is the structural relationship between sermorelin and the body's own GHRH?
Related on Peptide Pilot
- Open
Sermorelin reference
Overview, mechanism, common mistakes, and FAQs.
- Open
All peptide calculators
Reconstitution, dose, mg-to-units, and vial duration tools.
- Open
mg vs units, explained
Plain-English breakdown of the conversion every dose depends on.
- Open
CJC-1295 calculators
Same category: GH Secretagogue.
- Open
Ipamorelin calculators
Same category: GH Secretagogue.
- Open
Tesamorelin calculators
Same category: GH Secretagogue.
Track Sermorelin doses in the app
Peptide Pilot stores your vial once and derives every subsequent dose, draw, and refill reminder from those numbers automatically.
Download on the App Store